Every worker's figures
The figures are laid out worker by worker, with the totals, so you can type them straight into the scheme's portal.
ClearLevy portable LSL check
The check is for employers and bookkeepers in community services in Victoria, NSW and SA, and in Victorian contract cleaning and security. It works out every covered worker's figures from your payroll export, and lists anything to fix before you lodge.
Free: the first 3 workers' figures, no card needed. Full return: A$49 a return (one scheme, one quarter). Pay by card and it unlocks straight away. No subscription.
Check your returnNext due dates
A worked example
For every worker, the check shows each pay line, what kind of pay it is, how much of it counts, and the scheme's rule behind it. Here's what it shows for one made-up worker.
This is a made-up example. Sam Example isn't a real worker. Sam works in community services in Victoria, started on 3 August and is paid monthly. The figures below are for the July to September 2026 return.
| Paid | Pay item | Kind | Amount | Hours | Counted pay | Counted hours | Rule |
|---|---|---|---|---|---|---|---|
| 31/08/2026 | Ordinary Hours | Ordinary hours or salary | $2,560.00 | 64.00 | $2,560.00 | 64.00 | Included: hours worked and amount paid (for salaried staff, the salary paid for the quarter and their ordinary hours) |
| 30/09/2026 | Ordinary Hours | Ordinary hours or salary | $2,880.00 | 72.00 | $2,880.00 | 72.00 | Included: hours worked and amount paid (for salaried staff, the salary paid for the quarter and their ordinary hours) |
| 30/09/2026 | Saturday 150% | Penalty-rate hours, whole payment (e.g. "Saturday 150%") | $480.00 | 8.00 | $320.00 | 8.00 | Community services: report all penalty hours, but pay at the base rate only (e.g. 4 Sunday hours at $50 + $5 penalty: report 4 hours and $200). Base rate $40.00 an hour, worked out from their ordinary pay and hours |
| 30/09/2026 | Overtime 150% | Overtime | $180.00 | 3.00 | $0.00 | 0.00 | Excluded: overtime hours and the whole overtime payment (e.g. for 38 ordinary hours and 8 overtime hours, report 38 hours) |
The levy is an estimate. The scheme's own invoice gives the final amount. Sam doesn't have a worker ID yet, so the check also asks whether you need to register Sam as a new worker in the portal.
Something not right? You can change any answer in the check, such as what kind of pay an item is or whether a worker is covered. The figures then update straight away.
What is this?
In some industries, long service leave follows the worker, not the job. Staff keep building it up as they move between employers in that industry, and a state scheme keeps the record.
To fund it, employers in covered industries report each covered worker's pay to the scheme every quarter and pay a levy. That quarterly report is the return. The check works out its figures from your payroll export.
Plain-English guides to each return: Victoria · NSW · SA.
Each scheme defines “ordinary pay” differently. In Victoria, community services count weekend pay at the base rate only, but cleaning counts the full penalty rate. Allowances, leave and overtime each have their own rules too. Most people end up rebuilding the same spreadsheet every quarter.
How it works
There's nothing to install and no logins to share. Nothing you load leaves your computer.
Load your payroll export (Excel or CSV) and, if you have one, your covered-worker list. They're read in your browser and never uploaded.
Which export?Choose your scheme and quarter. Then say what each pay item is (the check suggests what it can), and who's covered. Your pay item answers are kept on your computer for next quarter.
You see the first 3 covered workers' figures in full, and how many of the others need attention. You also see the totals check, which shows whether every pay line in your export is accounted for.
Pay by card on the page and every worker's figures unlock straight away. You type them into the scheme's portal and lodge the return yourself.
Before you start
It's one detailed report from your payroll software. We never need your logins.
Use the report that has a row for each pay item on each payslip. It's often called “Payroll Activity Details”. Don't use a summary with one total per employee. The report needs these columns:
Put every employee in the report, not only the covered ones. You say who's covered in the check. It then flags anyone paid in the quarter who isn't on your list.
NSW or SA community services: the first to the last day of the quarter. These schemes count pay paid in the quarter.
Victoria (community services, cleaning or security): the first day of the quarter to the payment date of your first pay run after it ends. For example, for July–September that might be 1 July to 15 October. Victoria counts work done in the quarter, so the check needs the pay run that covers the quarter's last days.
The check shows the exact dates for the quarter you choose.
Save the report as Excel (.xlsx) or CSV, then load it when you check your return. It stays on your computer.
These steps come from the help guides we could read. We haven't tried any of these reports with the check yet, so it may not be able to read them.
Try the free preview first. If the check can't read your export, it tells you why. If your report has at least two of the columns it needs, the check also names the ones it couldn't find.
If yours won't load, email thomas@clearlevy.com and we'll tell you whether we can help yet.
What you get
The figures are laid out worker by worker, with the totals, so you can type them straight into the scheme's portal.
The check flags new starters, leavers, workers missing a scheme ID, pay runs your export leaves out, and repeated rows. If you kept last quarter's setup, it also flags big changes the portal may ask you to explain.
The check shows the rule behind each line, so you can trace every number back to a line in your payroll export.
Prices
Free
You see the first 3 covered workers' figures in full, and everyone else by name. You also see how many of the others need attention, and the totals check. No card needed.
3 or fewer covered workers? Then the whole return is free.
A$49
This covers one scheme for one quarter. You get every worker's figures and warnings, and the totals. You can also keep this business's setup for next quarter.
You pay by card on the check's page through Stripe, so we never see your card details. The full return unlocks straight away, and you get an unlock code to keep for that scheme and quarter. The Victorian upload file is a preview for now and isn't part of the price.
Our service comes with guarantees that can't be excluded under the Australian Consumer Law. If our tool gets a figure wrong, email thomas@clearlevy.com. Prices are in Australian dollars. No GST is charged: ClearLevy isn't registered for GST.
No. That calculator works out one employee's leave entitlement under the Long Service Leave Act. The ClearLevy check works out every covered worker's figures for your quarterly portable long service leave return, from your payroll export.
No. You stay in control. The check works out the figures worker by worker. You then enter them in the scheme's portal and lodge the return yourself.
No. The check does the working out on your own computer, so your payroll files never need to leave it. Please don't email us your payroll files. We don't need them.
You pay by card on the check's page, once you've seen the free preview. Payment goes through Stripe, so we never see your card details. The full return unlocks straight away. You also get an unlock code for that scheme and quarter. You can use the code on any computer, along with the email you paid with. If the page can't confirm your payment, email thomas@clearlevy.com with your Stripe receipt and we'll send your code.
It stays on your computer. The check runs inside your web browser. Your payroll export and worker list are read there, and are never uploaded, sent to us or stored by us. No AI is used on them. Your browser keeps your setup (such as your pay item answers) on your computer for next quarter, and you can clear it at any time. Our privacy notice has the details.
It reads a detailed payroll report saved as Excel or CSV, with a row for each pay item on each payslip. It finds the columns by their names: employee, pay date, pay item, hours or units, and amount. For MYOB, Employment Hero and QuickBooks, see where their help guides say to look. We haven't tried those reports with the check yet. Try the free preview first. If your export won't load, the check tells you why. You can then email thomas@clearlevy.com and we'll tell you whether we can help yet.
You do. Whether someone is covered depends on their role and the scheme's rules, and we don't give advice on it. If you're unsure about someone, check with the scheme. The check flags anyone paid in the quarter who isn't on your covered-worker list, so you can decide about them.
Yes, for recent quarters. Choose the quarter in step 1 of the check. Each quarter is its own return, with its own free preview and its own unlock code.
For Victoria, as a preview only. The check can fill in the portal's own return spreadsheet, but so far it's only been tried on a made-up copy, not a real one. Until it's been tested, please type the figures into the portal instead. The upload file isn't part of the price. For NSW and SA, the check gives you the figures to type in.
I'm Thomas. I run ClearLevy on my own, as a sole trader in Australia (ABN 39 914 509 732). Questions come straight to me at thomas@clearlevy.com.
No. The check works out the figures from the data you load and the scheme's published rules. If you're unsure whether your organisation or a worker is covered, check with the scheme directly. ClearLevy isn't a registered tax agent or BAS agent and doesn't give advice.
The free preview shows 3 workers. You don't need a card, there's no software to install, and nothing leaves your computer.
Check your return